Heavy Loading Ve Water Seal V Ring Type End Face Seal
Model No.: VE series
The function of a V-seal is to exclude dirt, water or other aggressive media from entering bearing housings while also retaining grease. The V-seal stretches over the shaft and assumes a tight interference fit. The V-seal rotates with the shaft causing the lip to rotate against the housing or bearing. As the speed increases, friction decreases due to centripetal force.
VE Style - Due to its extra-long sealing lip, the VE-style V-seal is used in applications where the housing is abnormally far away from the shaft. VE V-seals larger than VE 2000 are available on inquiry.
1.Special Features and Advantages of the V-shaped Water Seals
The V-shaped Water Seal fixates on the axle through its own elastic properties. Its flexible sealing lip uses a sm-all contact force that contacts with the axle surface.
The flexible sealing lip can manage the eccentricity of the axles, cavity and differing angles of the axle and is also able to compensate for the errors made during the mac-hining process of the axle.
The sealing lip is effective in preventing leakage of the contents such as o-ils and lubricating liquids found inside the mechanical part and at the same time prevents external dust, dirt and other contaminants from entering into the inter-ior. As the V-shaped seal follows the rotational motion of the axle, the centrif-ugal force thus created causes the seal to act in a manner resembling slip rings and is a good medium for deterring contaminants to reach the interior.
V-shaped seal is different from the oil seal in that it relies on its elastic sealing lips which has a radial sealing effect. The seal lip possesses good flex-ibility and adaptability. Compared with other sealing equipment, it has a simple design, requires a smaller clearance to use and at the same time solves the problem of the eccentric rotation of the axle.
The V-shaped seal possesses the following advantages:
-Pure elastic rubber construction without any additions of metals
-Eases the workload on design processes and easily installed with no remachi-ning needed
-Eliminates the need for re-machining of the axle surface and complies with the surface precision and hardness for the axle surface. Therefore axles do not necessarily need to be hard.
-Easy installation and removal; high reliability
-Small surface contact with other parts, thereby lowering frictional forces and heating due to friction resulting in a longer life span
-Doubles as a medium for sealing effect and prevents dust from contamination the interior Morgan Seals has the biggest vulcanizing machine(4000T) and different kinds of seal moulds. So for the non standard Oil Seals, please do not hesitate to contact with us. The following is the the picture of Morgan production line and warehouse:
Guangzhou Morgan Seals Co., Ltd the expert in sealing solution field who combines the rich seals research and production experience of her parent firm with the advanced technology and administration of Morgan, Worcester. Morgan Seals Research and Development ability is based on her parent firm who has won awards as scientific research achievements for more than 1000 projects and over 200 of them won scientific and technological progress prizes of municipal, provincial, ministerial and national levels. At the same time, it also has one National Certified Laboratory, one National Engineering Research Centers and three Industry Level Inspection Centers.
Contact us if you need more details on V Seal. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Water Seal、Face Seal. If these products fail to match your need, please contact us and we would like to provide relevant information.