Find Pressure Washer Pump Seals, Piston Water Seals, V Type Pressure Washer Seal on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Pressure Washer Pump Seals > Pump Repair Kit Complte U-Seal Packing25*35

Pump Repair Kit Complte U-Seal Packing25*35

Basic Info

Model No.:  18*26;18*28;24*32;16*26;25*35;28*38 and custom

Product Description

Model NO.: 18*26;18*28;24*32;16*26;25*35;28*38 and custom Operation Type: Fixed Nozzle Type: Round Water Column Nozzle Condition: New Seal Type: V or U Color: Black, Brown, White Temperature: up to 80 Linear Velocity: Below 2m/S Specification: 20*20 HS Code: 4010120000 Type: Hot Water High Pressure Cleaner Drive: Motor Application: Industrial Customized: Customized Material: NBR/FKM+Aramid/Fabric ;PTFE/POM Midia: Mineraloils.Emulsion Water an Oil Operating Pressure: Below 250bar Trademark: kdr Origin: China Our Company
We have a proven reputation for providing Quality Technical Sealing Solutions for any sealing problem. We employ highly experienced and skilled technical staff.
We ensure that customer satisfaction is a top priority at every level of our company. We provide a comprehensive range of standard or nonstandard Hydraulic Seals in materials, profiles and sizes to suit a wide variety of applications.
Quality makes the difference.
Saixuan Seal makes the difference.

Information of high pressure washing seal
Water Seal refers to have a certain height of water column in the device, to prevent the drain gas into the interior of the system.In construction of drainage pipe, water seal is located in sanitary ware drain, used to resist pressure difference change drainage tube, drainage pipe system to prevent gas into the interior of a certain height in the column of water, often implemented with a trap.
The V-ring is produced by rubber,It has very good Elasticity.It can be elongated easily.It can be installed easily and rotary together with the shaft.
VA Style - Due to its intermediate cross-section and wide range of diameters, the VA-style is the most popular V-seal design
  
Hardness: 60-90ShoreA
Temperature:-20°c-220°c
Speed:≤30m/s
pressure:≤40Mpa
 
High/low temperature resistance, oil and fuel resistance,
weathering resistance,
O zone resistance 
1.Good sealing and damping.
2.Water resistance.
3.Anti-aging.
4.Anti-ozone.
5.Oil-resistant
6.Pressure resistant.
7.High and low temperature resistant.
 
good elasticity, strong adaptive load against axial  and radial viberation, bear the high temperature and changeable pressure, easily to be installed or uploaded
 
Some of the related fabric reinforced rubber seal
Step Seal
 
        Step seal is usually made from synthetic rubber qualitative protection ring and filled ptfe qualitative special shape of rectangular, trapezoidal seal ring, like to circle can be divided into the hole with the step seal and with the stern shaft sealing, the sealing effect and the sealing mechanism and to circle, but it only has a one-way seal effect.
 
Conventional materials: PTFE/ NBR/ PU;
 
Temperature: -30/+100 degrees Celsius;
 
Speed: Less than 5m/s;
 
Pressure: Less than 40Mpa
SPGO
        SPGO is usually made from synthetic rubber qualitative protection ring and superposition of filled ptfe qualitative square seals use, it can be divided into the hole and shaft used to use to circle, but its sealing function is the same, in accordance with its own initial deformation on the sealing surface of high contact stress, prevent leakage of pressure of the liquid. Hydraulic cylinder, pressure of liquid by elastic ring in the maximum extrusion rectangular sealing ring, make it close to the sealing surfaces, resulting in increased with the pressure of the liquid pressure of higher and higher additional contact stress, contact stress and the initial together to prevent leakage of liquid pressure.
Conventional materials: PTFE/ NBR/ PU;
Temperature: -30/+100 degrees Celsius;
Speed: Less than 5m/s;
Pressure: Less than 40Mpa
Piston seal
 
        Piston seal used for reciprocating motion of hydraulic cylinder.
 
Conventional materials: TPU / CPU/ Rubber;
 
Temperature:
 
TPU: -40/+80 degrees Celsius;
GPU: -40/+120 degrees Celsius;
 
Speed: Less than 0.5m/s;
 
Pressure: Less than 32Mpa;
 
Rod seal
 
        Rod seal used for reciprocating motion of hydraulic cylinder.
 
Conventional materials: TPU / CPU/ Rubber;
 
Temperature:
 
TPU: -40/+80 degrees Celsius;
GPU: -40/+120 degrees Celsius;
 
Speed: Less than 0.5m/s;
 
Pressure: Less than 32Mpa;
Stainless steel lip Oil Seal
 
        Stainless steel lip oil seal is made of stainless steel plate, the shell can be rubber or plastic bags, lip with modified PTFE, wall engraved with the spiral groove, it has wide contact with shaft surface, a thrust inward happens when axis rotation, stop the outflow of fluid and achieve effective seal. Skeleton oil seal seal selection of materials for the filled PTFE modified (main filling ingredients for: glass fiber, carbon fiber, graphite, molybdenum disulfide) greatly improve the wear ability of PTFE. Temperature range -70 °C to 250 °C, pressure of 3 mpa, suitable for all kinds of brands, various types of screw, sliding vane compressor is used.
Conventional materials: PTFE+SS
Wiper
 
        Wiper used for reciprocating motion cylinder, cylinder piston rod sealing and dustproof.
 
Conventional materials: TPU / CPU/ FKM/ NBR
 
Temperature:
 
TPU: -40/+80 degrees Celsius;
GPU: -40/+120 degrees Celsius;
NBR: -30/+120 degrees Celsius;
FKM: -20/+200 degrees Celsius;
 
Speed: Less than 0.5m/s;
 
V-packing
 
v-packing are axial seals with an elastomer sealing element vulcanised in the mould. The typical design of a v-packing is comprised of the body, the flexible joint and the sealing lip. It is consist of three parts, which are seal ring, support ring and pressing ring. It is the seal used for piston rod of tank.
Conventional materials: NBR, NBR Fabric, Viton, Viton fabric, PTFE, PTFE filled carbon/bronze, PU, PA, copper
Temperature:
NBR: -30°C /120°C; FKM -20°C /200°C;
PTFE: -55  °C  /260 °C
Speed: Less than 5m/s;
Pressure: Less than 60Mpa
TC oil seal
 
Application:
 
1. Fluid system (static&dynamic)
2. Hydraulic system (dynamic)
3. Pneumatic system (dynamic)
4. Oil or grease media sealing 
5. Water media sealing
6. automobile, motorcycle, industry, 
agricultural machinery,truck, buses, trailers,
exercise equipment.
 
Conventional materials: NBR/ FKM

Contact  

Welcome to visit our website for our quality Polyurethane products' information.
Please do not hesitate to contact us directly, if you can't get the right information on this product detail webpage.
 
 
Linkin:http://www.linkedin.com/in/seven-chia-002255122/
Facebook:https://www.facebook.com/seven.chia.98

 

Contact us if you need more details on Pump Seal. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pump Repair Kit、Piston Water Seals. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Pressure Washer Pump Seals