Oms-Mr/Od Profile NBR/FKM/PTFE Hydraulic Cylinder Rod Seals
Basic Info
Model No.: OJ series
Product Description
Model NO.: OJ series Application: Cylinder Performance: High Pressure Standard: Standard Slide Ring Material: PTFE-Bronze Reciprocation Speed: 0-5m/S FKM Temperature: -20~+200 Celicus Degree Non-Standard: Accept Customized Products Color: Customized Specification: 3mm-2000mm HS Code: 4016931000 Material: PTFE Bronze Type: Shaft Seal Shape: O-Ring O-Ring Material: NBR/FKM Pressure: 50MPa Frequency: 0-5 Hz NBR Temperature: -35~+120 Celicus Degree Working Media: Hydraulic Oil, Gas, Water etc Trademark: morgan Origin: China Description The single-acting rod sealing set profile OJ consists of a PTFE friction ring and a pre-tightened rubber elastomer O-Ring. The asymmetrical cross-section of the slipper ring is designed for best drag oil performance during stroke in both directions. Optimal sealing performance will be obtained if the rod sealing set is used in tandem with a double-wiper. Profile OD is particularly suitable for sealing rods in control cylinders, servo-assisted equipment, machine tools and quick acting cylinders. The sealing set is also suitable for applications in the automotive (e.g. shock absorbers) and process industries. The material combination of the slipper ring (PTFE) and the O-Ring (elastomer) makes this product suitable for a wide range of applications, especially for aggressive media and/or high temperatures. Multiple compounds can alternatively be selected according to the individual application profile.Design Standard The hydraulic piston rod seal step seal OJ series conform GB/T 15242.1-94, ISO 7425-2 and GB/T 15242.3-94 standards. Reference Parker's OD series, Merkel's OMS-MR series, Trelleborg's RS1 series, AS's XB series and Shamban's S55013 series.Advantages • High extrusion resistance.
• Short axial assembly length.
• Insensitive to pressure peaks.
• Excellent wear/ abrasion resistance.
• Dimensions according to ISO 7425-2.
• Installation in closed and undercut housings.
• Available in diameters from 4 to 3000 mm.
• Optimal sealing in static and dynamic applications.
• Good energy efficiency due to low friction coefficient.
• Further dimensions of machined series with short lead times available.
• Minimal break-away and dynamic friction and no stick-slip tendency ensures uniform motion even at low speeds.
• Wide temperature range and excellent chemical resistance, depending on the material selected for the O-ring.
• Adaptable to nearly all media thanks to high chemical resistance of the sealing ring and large O-Ring compound selection.
Technical data
Applications Shock absorbers
Distributor
Standard cylinders
Rod sealing set for hydraulic cylinders
Materials Friction ring
Bronze-filled PTFE
Carbon-filled PTFE
O'Ring
NBR 65-92 Shore A Black
FKM 75-91 Shore A Green, Red, Black, Brown
Thermal Application:
Acrylonitrile-butadiene-rubber(NBR): -30~+120ºC,
Fluor-rubber(FKM): -20~+200ºC;
Extrusion gaps
Surface roughness
Chamfers and radius
Installation dimensions
Morgan Seals has the biggest vulcanizing machine(4000T) and different kinds of seal moulds. So for the non standard hydraulic Rod Seals, please do not hesitate to contact with us. The following is the the picture of our production line and warehouse:
Our services:
Guangzhou Morgan Seals Co., Ltd the expert in sealing solution field who combines the rich seals research and production experience of her parent firm with the advanced technology and administration of Morgan, Worcester. Morgan Seals Research and Development ability is based on her parent firm who has won awards as scientific research achievements for more than 1000 projects and over 200 of them won scientific and technological progress prizes of municipal, provincial, ministerial and national levels. At the same time, it also has one National Certified Laboratory, one National Engineering Research Centers and three Industry Level Inspection Centers.
Contact us if you need more details on Rod Seal. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Hydraulic Seals、Hydraulic Rod Seals. If these products fail to match your need, please contact us and we would like to provide relevant information.
• Short axial assembly length.
• Insensitive to pressure peaks.
• Excellent wear/ abrasion resistance.
• Dimensions according to ISO 7425-2.
• Installation in closed and undercut housings.
• Available in diameters from 4 to 3000 mm.
• Optimal sealing in static and dynamic applications.
• Good energy efficiency due to low friction coefficient.
• Further dimensions of machined series with short lead times available.
• Minimal break-away and dynamic friction and no stick-slip tendency ensures uniform motion even at low speeds.
• Wide temperature range and excellent chemical resistance, depending on the material selected for the O-ring.
• Adaptable to nearly all media thanks to high chemical resistance of the sealing ring and large O-Ring compound selection.
Technical data
Temperature | -30°C/+200°C |
Pressure | 50 MPa max |
Speed | 5 m/s |
Medias | Mineral-based hydraulic oil HFA, HFB, Biodegradable hydraulic oil Non-aggressive gases, Water |
Distributor
Standard cylinders
Rod sealing set for hydraulic cylinders
Materials Friction ring
Bronze-filled PTFE
Carbon-filled PTFE
O'Ring
NBR 65-92 Shore A Black
FKM 75-91 Shore A Green, Red, Black, Brown
Thermal Application:
Acrylonitrile-butadiene-rubber(NBR): -30~+120ºC,
Fluor-rubber(FKM): -20~+200ºC;
Extrusion gaps
Radial section S | Radial extrusion gap F/2 |
0.0 MPa to 5.0 MPa | |
2.45 | 0.30 |
3.65 | 0.40 |
5.35 | 0.50 |
7.55 | 0.70 |
10.25 | 0.80 |
12.00 | 0.90 |
13.65 | 1.00 |
19.00 | 1.20 |
Roughness | Dynamic surface area | Static surface area | Groove flanks |
---|---|---|---|
Ra | 0.05 - 0.2 µm | ≤ 1.6 µm | ≤ 3.2 µm |
Rz | 0.4 - 1.6 µm | ≤ 6.3 µm | ≤ 10.0 µm |
Rmax | 0.63 - 2.5 µm | ≤ 10.0 µm | ≤ 16.0 µm |
Radial section S | Radius R1 | Radius R2 | Chamfer C |
2.45 | 0.30 | 0.40 | 3.00 |
3.65 | 0.30 | 0.60 | 3.00 |
5.35 | 0.30 | 1.00 | 3.00 |
7.55 | 0.30 | 1.30 | 5.00 |
10.25 | 0.30 | 1.80 | 6.00 |
12.00 | 0.30 | 1.80 | 8.00 |
13.65 | 0.30 | 2.50 | 10.00 |
19.00 | 0.30 | 3.00 | 12.00 |
Rod diameter Ød1 f8/h9 | Groove diameter | Groove width | Radial section | O-ring cross-section | ||
Standard series | Light series | Heavy-duty series | ØD1 H9 | L1 0/+0.20 | S | Ød2 |
3.0 - 7.9 | 8.0 - 18.9 | --- | d1 + 4.90 | 2.20 | 2.45 | 1.78 |
8.0 - 18.9 | 19.0 - 37.9 | --- | d1 + 7.30 | 3.20 | 3.65 | 2.62 |
19.0 - 37.9 | 38.0 - 199.9 | 8.0 - 18.9 | d1 + 10.70 | 4.20 | 5.35 | 3.53 |
38.0 - 199.9 | 200.0 - 255.9 | 19.0 - 37.9 | d1 + 15.10 | 6.30 | 7.55 | 5.33 |
200.0 - 255.9 | 256.0 - 649.9 | 38.0 - 199.9 | d1 + 20.50 | 8.10 | 10.25 | 6.99 |
256.0 - 649.9 | 650.0 - 999.9 | 200.0 - 255.9 | d1 + 24.00 | 8.10 | 12.00 | 6.99 |
650.0 - 999.9 | 1000.0 - 1200.0 | 256.0 - 649.9 | d1 + 27.30 | 9.50 | 13.65 | 8.40 |
1000.0 - ** | --- | 650.0 - 999.9 | d1 + 38.00 | 13.80 | 19.00 | 12.00 |
Morgan Seals has the biggest vulcanizing machine(4000T) and different kinds of seal moulds. So for the non standard hydraulic Rod Seals, please do not hesitate to contact with us. The following is the the picture of our production line and warehouse:
Our services:
Guangzhou Morgan Seals Co., Ltd the expert in sealing solution field who combines the rich seals research and production experience of her parent firm with the advanced technology and administration of Morgan, Worcester. Morgan Seals Research and Development ability is based on her parent firm who has won awards as scientific research achievements for more than 1000 projects and over 200 of them won scientific and technological progress prizes of municipal, provincial, ministerial and national levels. At the same time, it also has one National Certified Laboratory, one National Engineering Research Centers and three Industry Level Inspection Centers.
Contact us if you need more details on Rod Seal. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Hydraulic Seals、Hydraulic Rod Seals. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Rod Seals > Others Rod Seals
Premium Related Products
Other Products
Hot Products
Fabric Reinforced Polyester Wear Strip/RingsPolyurethane Spring Energized SealsQuality Assurance Machine Tool Soft BandsPhenolic Resin Hard Tape with Special DesignTandem Seal for Rod - Gtdi SealsSpring Energized Seal PTFE for Pump/ValveCarbon Filled PTFE Spring Energizes Seals for HydraulicVee Packing Set SealsMechanical PU Piston Seal, Piston Seal U Cup-YxdTeflon Spring Seal (PTU/ PTA/ PTB)Leading Product Hydraulic PTFE Rod SealWear Ring and Guide Tape (GST)PTFE Guide Strip Bearing Strips for Pump Guide StripPTFE+Bronze Piston Seal for Machine ToolsTeflon Spring Energized Seals for Mobile HydraulicPhenolic with Fabric Hard Tape (CG010)