Tg4/M16 Profile PTFE High Pressure Radial Shaft Seal Ring
Model No.: EO series
Morgan EO swiveling seals are single or double acting piston Rotary Seals composed of a filled PTFE grooved friction ring and a pre-tightened rubber O-ring. It is generally used together with guide rings.
The design and apply refers to the GS56140-GS56145 series of B+L, TG4 series of Trelleborg, M16 series of Merkel, OQ series of Parker, YRB series of AS.
Low friction coefficient; no stick-slip effect on startup
Excellent abrasion and extrusion resistance
The grooves provide an integrated lubrication system
Excellent dimensional stability
|Medias||Mineral hydraulic oils |
Others (contact our experts)
Rotary hydraulic transmission exists in industries such as engineering machinery, construction machinery and mobile devices. It seals the rod, shaft, pin, rotary distributors, hydraulic motors and rotary joints which make rotating or swinging motion. Double acting rotary seal, can undergo pressure from both sides or alternating pressure. Installed in grooves of ISO 7425 standard. Single acting structure of higher rotating speed.
NBR 70 Shore A
FKM 70 Shore AExtrusion gaps
|Radial section |
|Radial extrusion gap |
|10 MPa||20 MPa||30 MPa|
|Roughness||Dynamic surface area||Static surface area|
|Ra||0.05 - 0.2 µm||≤ 1.6 µm|
|Rz||0.4 - 1.6 µm||≤ 10.0 µm|
|Rmax||0.63 - 2.5 µm||≤ 16.0 µm|
|Radial section |
|Bore diameter |
|Groove diameter||Groove width||Radial section||O'Ring |
|BECA 843 |
|BECA 841 |
|Ød1 h9||L1 0/+0.20||S||Ød2|
|8.0 - 39.9||---||D1 - 4.90||2.20||2.45||1.78||1|
|40.0 - 79.9||14.0 - 39.9||D1 - 7.50||3.20||3.75||2.62||1|
|80.0 - 132.9||40.0 - 79.9||D1 - 11.00||4.20||5.50||3.53||2|
|133.0 - 329.9||80.0 - 132.9||D1 - 15.50||6.30||7.75||5.33||2|
|330.0 - 669.9||133.0 - 329.9||D1 - 21.00||8.10||10.50||6.99||2|
|670.0 - 999.9||330.0 - 669.9||D1 - 28.00||9.50||14.00||8.40||2|
Morgan Seals has the biggest vulcanizing machine(4000T) and different kinds of seal moulds. So for the non standard rotary seals, please do not hesitate to contact with us. The following is the the picture of our production line and warehouse:
Guangzhou Morgan Seals Co., Ltd the expert in sealing solution field who combines the rich seals research and production experience of her parent firm with the advanced technology and administration of Morgan, Worcester. Morgan Seals Research and Development ability is based on her parent firm who has won awards as scientific research achievements for more than 1000 projects and over 200 of them won scientific and technological progress prizes of municipal, provincial, ministerial and national levels. At the same time, it also has one National Certified Laboratory, one National Engineering Research Centers and three Industry Level Inspection Centers.
Contact us if you need more details on Shaft Seal. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Radial Seal、Roto Seal. If these products fail to match your need, please contact us and we would like to provide relevant information.